PINA Slim Flat LED Pool Light, Nicheless Surface Mount, Resin-Filled IP68, 12V, 10.2 inch

Most underwater pool lights are a housing with a gasket, and a gasket is the part that eventually fails. This fixture is different: the entire LED panel is encapsulated in solid epoxy resin, so there is no air cavity and no seal to degrade. Water simply has nowhere to go. That construction is what earns the IP68 rating and what keeps the light working season after season.

It is also genuinely slim. At 10.2 inches across and just 1.5 inches deep, it sits close to the pool wall instead of protruding into the swim area. And because it mounts flat to any smooth surface, there is no niche to cut, no core drilling, and no demolition on an existing pool. Mounting bracket and screws are included.

Output scales to the pool. The 15W panel delivers 1,300 lumens for spas, water features and small pools. The 30W panel puts out 2,430 lumens for standard residential pools. The 45W panel is there when you want the entire basin lit from a single fixture. Choose cold white at 6250K, warm white at 3000K, blue, or RGB color-changing controlled from your existing switch.

Key features

• Full resin encapsulation. No gasket, no air cavity, no seal to fail
• Slim 1.5 inch (38mm) profile, 10.2 inch (260mm) diameter
• No niche required. Mounts flat to any smooth pool surface
• IP68 sealed for permanent underwater installation
• 12V AC low voltage
• 15W / 30W / 45W nominal output, up to 2,430 lumens
• Cold white 6250K, warm white 3000K, blue, and RGB color-changing
• 2.5m cable standard, longer runs available on request
• Mounting bracket and screws included
• Optional liner cable nozzle for vinyl liner pools, fits cable up to 20mm

Specifications

Important: the 45W model must be operated fully submerged. Do not run it out of water. Put that line on the listing page, not just in the manual, since it is a real return and warranty exposure.